A green approach for the automatic quantitative analysis of additives in plastic samples using in-tube extraction dynamic headspace sampling technique coupled to GC-MS/MS.

BACKGROUND: Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples. The proposed method consists of in-tube extraction dynamic headspace sampling (ITEX-DHS) combined with gas chromatography (GC) and mass spectrometry (MS/MS) determination. RESULTS: Several parameters affecting the ITEX-DHS extraction of 47 additives in plastic samples (including phthalates, bisphenols, adipates, citrates, benzophenones, organophosphorus compounds, among others) were optimised. The use of matrix-matched calibration, together with labelled surrogate standards, minimises matrix effects, resulting in recoveries between 70 and 128%, with good quantitation limits (below 0.1 µg g-1 for most compounds) and precision (<20%). The method proposed can be applied to any type of polymer, but due to the existence of the matrix effect, calibrates with the adequate matrix should be performed for each polymer. SIGNIFICANCE: This method represents an effective improvement compared to previous methods because it is fast, solvent-free, fully automated, and provides reliable quantification of additives in plastic samples.

Bioaccumulation of trace metals in the plastisphere: Awareness of environmental risk from a European perspective.

The term "Plastisphere" refers to the biofilm layer naturally formed by microorganisms attaching to plastic surfaces. This layer possesses the capability to adsorb persistent organic and inorganic pollutants, particularly trace metals, which are the focus of this research study. Immersion experiments were concurrently conducted in five locations spanning four European countries (France, Ireland, Spain, and Italy) utilising eight distinct polymers. These immersions, repeated every three months over a one-year period, aimed to evaluate the baseline bioaccumulation of 12 trace metals. The study underscores the intricate nature of metal bioaccumulation, influenced by both micro-scale factors (such as polymer composition) and macro-scale factors (including geographical site and seasonal variations). Villefranche Bay in France exhibited the lowest metals bioaccumulation, whereas Naples in Italy emerged as the site where bioaccumulation was often the highest for the considered metals. Environmental risk assessment was also conducted in the study. The lightweight nature of certain plastics allows them to be transported across significant distances in the ocean. Consequently, evaluating trace metal concentrations in the plastisphere is imperative for assessing potential environmental repercussions that plastics, along with their associated biota, may exert even in locations distant from their point of emission.

Organotin compounds in seafood by ultrasonic assisted extraction and gas chromatography-triple quadrupole tandem mass spectrometry.

Although restricting environmental quality values for organotin compounds (OTs) are set by Directive 2013/39/EU of the European Parliament, marine environment remains being affected due to maritime circulation at global scale. Fish and seafood accumulate OTs, making fish and seafood consumption the main source of OTs in humans. Because of the fish and seafood matrices complexity and the required low limits of detection, a robust and fast procedure for the quantification of OTs in fish and seafood, using ultrasound-assisted extraction and gas chromatography-tandem mass spectrometry, was validated and applied. Detection (2.7 µg Sn kg-1) and quantification (8.0 µg Sn kg-1) limits, repeatability and intermediate precision (<10%), accuracy by analysing ERM®-CE477 Mussel Tissue and analytical recoveries (65-122%) were assessed. Multivariate analysis shown that the matrix effect for some OTs displayed good negative correlation with the fat and protein content. Health risk assessment of OTs intake revealed no serious risk for human consumption.

Filtration of biopolymer PHB particles loaded with synthetic musks does not cause significant bioaccumulation in marine mussels.

The role of the biopolymer polyhydroxybutyrate (PHB, <250 µm) as a vehicle of a synthetic musks mixture (celestolide, galaxolide, tonalide, musk xylene, musk moskene and musk ketone) to Mytilus galloprovincialis was investigated. For 30 days, virgin PHB, virgin PHB+musks (6.82 µg g-1) and weathered PHB+musks, were daily spiked into tanks containing mussels, followed by a 10-day depuration period. Water and tissues samples were collected to measure exposure concentrations and accumulation in tissues. Mussels were able to actively filter microplastics in suspension but the concentration of the musks found in tissues (celestolide, galaxolide, tonalide) were markedly lower than the spiked concentration. Estimated Trophic Transfer Factors suggest that PHB will only play a minor role on musks accumulation in marine mussels, even if our results suggest a slightly extended persistence in tissues of musks loaded to weathered PHB.

Adsorption of pesticides and personal care products on pristine and weathered microplastics in the marine environment. Comparison between bio-based and conventional plastics.

The hydrophobicity of persistent organic pollutants (POPs) makes them adsorb on microplastics in the marine environment, affecting their distribution, persistence, or their transfer to the trophic chain. Fragrances and non-polar pesticides can be adsorbed by microplastics in the marine environment because of their physico-chemical characteristics. In this work, the adsorption of two pesticides (α-endosulfan and chlorpyrifos) and 6 musk fragrances (musk xylene, musk ketone, musk moskene, galaxolide, tonalide, and celestolide) on polyamide (PA6) (a petroleum based polymer) and on polyhydroxybutyrate (PHB) (biopolymer) in seawater was studied, considering also the effect of water temperature and plastic weathering. Results show higher adsorption of the selected pollutants for PHB than PA, being PA more affected by the water temperature and the plastic weathering. The highest percentage of adsorption was achieved in most cases at 24 h. In addition, this process was irreversible, as it showed the leaching assays. Besides, this work revealed that plastics mitigate the degradation of α-endosulfan in aquatic media (hydrolysis), showing that plastics can act as inhibitors of degradation of POPs, increasing its persistence in the environment.

Phthalates, organotin compounds and per-polyfluoroalkyl substances in semiconfined areas of the Spanish coast: Occurrence, sources and risk assessment.

In this work two sensitive areas of the Spanish coast located in the Atlantic (Ria de Vigo) and Mediterranean (Mar Menor lagoon) have been studied regarding their contamination by phthalates, organotin compounds and per-polyfluoroalkyl substances (seawater and sediments) in two different campaigns (spring and autumn in 2015). PFAS and OTCs were detected in seawater and sediments at low concentrations (few ng L-1 or ng g-1), whereas PAEs were detected at levels two orders of magnitude higher, particularly in Mar Menor lagoon due to its semi-confined characteristics. However, PAEs and OTCs concentration in sediments were higher in Ría de Vigo than in Mar Menor lagoon as a consequence of the influence of the important urban nuclei and port in that area. The ecological risk assessment revealed that in both areas tributyltin, dibutyltin and diethylphthalate pose a significant risk in sediments, whereas in seawater tributyltin in both areas resulted in a high risk.

Identification of contaminants of emerging concern with potential environmental risk in Spanish continental shelf sediments.

The distribution of per- and polyfluoroalkyl substances (PFAS), alkylphenols, organotin compounds, phthalates, alkylated polycyclic aromatic hydrocarbons, current-use pesticides (CUPs) and personal care products (PCPs) was characterized in 29 surface sediments from two Spanish Iberian continental shelf areas (14 on the Atlantic and 15 on the Mediterranean coasts). Concretely, 115 organic contaminants were determined and a specific methodology was used for each contaminant group, including contaminants of emerging concern (CECs) and traditional ones, such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorinated pesticides (OCPs). PAHs, alkylated PAHs, alkylphenols and phthalates were found in all samples, showing mean concentrations per group higher than 20 ng/g (16-4974 ng/g d.w.) in the subregions under consideration (Galician, Cantabrian, Levantine-Balearic and Strait-Alboran). CUPs and PCPs were found in the majority of samples at very low concentrations of ng/g (1.4-46.8 ng/g d.w.), whereas organotins and PFAS were found principally in sediments from the Mediterranean subregions (2.5-3.9 ng/g d.w.). Different distribution patterns were observed for the contaminant groups and subregions under consideration as a consequence of the diverse predominant sources (industrial, urban, transport and agricultural activities) and environmental behavior (mainly hydrophobicity and persistence). Risk assessment confirmed the impact of phthalates, alkylphenols, PAHs and PCBs on Atlantic ecosystems and of alkylphenols, chlorpyrifos, phthalates, TBT, PAHs, OCPs and PCBs on the Mediterranean ones. Furthermore, the presence of CUPs, PCPs and PFAS in sediments from the Spanish continental shelf located between 2 and 31 km from the coast suggested that those contaminants may also provoke adverse effects on coastal marine ecosystems between their sources and their depositional areas. CAPSULE: Alkylphenols, phthalates and organotins may provoke adverse effects on Spanish coastal marine ecosystems from their sources to the sediment depositional areas.

Triphenyltin induces imposex in Nucella lapillus through an aphallic route.

Triphenyltin (TPT) was used until recently as a biocide in antifouling systems and nowadays is still applied as an agriculture pesticide in some countries. This compound is known to cause imposex (the imposition of male characters in females of gastropod molluscs) in a very limited number of species, when compared with tributyltin (TBT), the universally recognized imposex-causing agent. In this study, we tested if TPT could induce imposex in females of the dog-whelk Nucella lapillus. Experimental groups of 40 females were injected with a volume of 2µL/g of soft tissue wet weight (ww) of one of the following treatments, using DMSO as a solvent carrier: DMSO (solvent control); 1µg/g ww of TBT (positive control); 0.2, 1 and 5µg/g ww of TPT and a non-injected group (negative control). Concentrations were confirmed in the organism tissues by means of chemical analyses of a pool of 10 specimens at T0 and then after the imposex analysis at T56days. After 8-week trial, results pointed out statistically significant differences between treatments, with both TPT and TBT positively inducing imposex. However, imposex development in TPT-injected females differed from that of TBT, since females that developed imposex presented an aphallic condition (no penis development) while the TBT-treated females developed standard imposex (with penis formation). These results suggest that TPT and TBT act differently in the sequential process of female masculinization, casting new insights about the hypothetical pathways underlying imposex development.

Use of pressurized hot water extraction and high performance liquid chromatography-inductively coupled plasma-mass spectrometry for water soluble halides speciation in atmospheric particulate matter.

The feasibility of pressurized hot water extraction (PHWE) has been novelty investigated to speed up water soluble halide species (bromide, Br(-); bromate, BrO(3)(-); iodide, I(-) and iodate, IO(3)(-)) leaching from atmospheric particulate matter (PM(10) and PM(2.5)). Total bromine and iodine and total water soluble bromine and iodine have been assessed by inductively coupled plasma-mass spectrometry (ICP-MS). Water-soluble bromine and iodine species were also measured by ICP-MS after anion exchange high performance liquid chromatography (HPLC). Variables inherent to the pressurized hot water extraction process (temperature, modifier concentration, static time, pressure, number of cycles and dispersing agent mass) were fully studied. Results showed that the pressurized leaching procedure can be performed in 9 min (5 min for pre-heating, 2 min of static time, 1 min of purge time, and 1 min of end relief time). The use of diluted acetic acid as a modifier did not improve the target recoveries. Dispersing agent (diatomaceous earth) was not needed, which reduces the time for filling the cells. Water-soluble halides were reached under the following extraction conditions: extraction temperature of 100 °C, pressure of 1500 psi, static time of 2 min and 1 extraction cycle. Optimized HPLC conditions consisted of an isocratic elution with 175 mM ammonium nitrate plus 15% (v/v) methanol as mobile phase (optimum flow rate of at 1.5 mL min(-1)). Analytical performances, such as limits of detection and quantification, repeatability and analytical recoveries of the over-all procedure have been established. Results obtained show water soluble halides accounted for approximately 20.9±1.3 and 11.8±0.6% of the total bromine and total iodine, respectively. A 79 and 89% of bromine and iodine was non-water soluble, which may be organic non-water soluble species. Br(-) and IO(3)(-) were found to be the major species, and they accounted for 100% of the total water-soluble bromine and iodine.

Simultaneous pressurized enzymatic hydrolysis extraction and clean up for arsenic speciation in seafood samples before high performance liquid chromatography-inductively coupled plasma-mass spectrometry determination.

The feasibility of pressurized conditions to assist enzymatic hydrolysis of seafood tissues for arsenic speciation was novelty studied. A simultaneous in situ (in cell) clean-up procedure was also optimized, which speeds up the whole sample treatment. Arsenic species (As(III), MMA, DMA, As(V), AsB and AsC) were released from dried seafood tissues using pepsin as a protease, and the arsenic species were separated/quantified by anion exchange high performance liquid chromatography (HPLC) coupled to inductively coupled plasma-mass spectrometry (ICP-MS). Variables inherent to the enzymatic activity (pH, temperature and ionic strength), the amount of enzyme (pepsin), and factors affecting pressurization (pressure, static time, number of cycles and amount of dispersing agent, C-18) were fully evaluated. Pressurized assisted enzymatic hydrolysis (PAEH) with pepsin can be finished after few minutes (two cycles of 2 min each one plus 3 min to reach the hydrolysis temperature of 50 °C). A total sample solubilisation is not achieved after the procedure, however it is efficient enough for breaking down certain bonds of bio-molecules and for releasing arsenic species. The developed method has been found to be precise (RSDs lower than 6% for As(III), DMA and As(V); and 3% for AsB) and sensitive (LOQs of 18.1, 36.2, 35.7, 28.6, 20.6 and 22.5 ng/g for As(III), MMA, DMA, As(V), AsB and AsC, respectively). The optimized methodology was successfully applied to different certified reference materials (DORM-2 and BCR 627) which offer certified AsB and DMA contents, and also to different seafood products (mollusks, white fishes and cold water fishes).

Pressurized liquid extraction followed by high performance liquid chromatography coupled to hydride generation atomic fluorescence spectrometry for arsenic and selenium speciation in atmospheric particulate matter.

This paper describes the development of a chelating solvent-based pressurized liquid extraction (PLE) method for the simultaneous extraction of As and Se species (As(III), As(V), Se(IV) and Se(VI)) in atmospheric particulate matter (PM(10)). The extracted As and Se species were evaluated by high performance liquid chromatography coupled to hydride generation atomic fluorescence spectrometry (HPLC-HG-AFS). The feasibility of several pressurized chelating solvents was recently investigated to leach As and Se species from atmospheric particulate matter. The best results (high recoveries) were obtained when using EDTA. Experimental design approaches were used to achieve the best compromise conditions for the simultaneous extraction of As and Se species by EDTA-PLE. Analytical performances, such as limits of detection (in the range of 0.01-0.02 ng m(-3)), quantification (in the range of 0.02-0.07 ng m(-3)), and repeatability of the over-all procedure ( approximately 10%) were established. Finally, As and Se species were determined in several atmospheric particulate matter (PM(10)) samples collected in an urban area of A Coruña city (northwest coast of Spain) in 2006. In all the atmospheric particulate matter samples that were analysed, As(V) and Se(IV) (in the range of 0.17-0.60 ng m(-3)) were the major species found.

As, Bi, Sb and Sn determination in atmospheric particulate matter by direct solid sampling-hydride generation-electrothermal atomic absorption spectrometry.

A novel, rapid and simple method by hydride generation-electrothermal atomic absorption spectrometry (HG-ETAAS) after direct As, Bi, Sb and Sn hydrides generation from untreated filters of atmospheric particulate matter (PM(10) and PM(2.5)) was optimised. PM(10) and PM(2.5) were not subjected to any pre-treatment: circular portions between 0.28 and 6.28cm(2) were directly placed into the reaction vessel of a batch mode generation system. A 2(8)x3/64 Plackett-Burman design was used as a multivariate strategy for the evaluation of the effects of several variables affecting the hydride generation, trapping and atomisation efficiencies. Trapping temperature was the most statistically significant variable for As, Bi and Sn. Atomisation temperature was also statistically significant for Sb determination. Optimum values of significant variables were selected by using univariate optimisation approaches. An aqueous calibration method was used throughout. The developed method has been found to be precise with relative standard deviations of 6.2, 5.3, 9.1 and 7.5% for 11 determinations in a filter sample containing 0.7, 1.0, 1.4 and 1.7microg l(-1) for As, Bi, Sb and Sn, respectively. Results obtained by direct solid sampling-HG-ETAAS have been found statistically comparable with those obtained after conventional method based on an acid digestion followed to ICP-MS. Absolute detection limits were 37, 15, 30, and 41ng l(-1) for As, Bi, Sb and Sn, respectively. Detection limits referred to the air volume sampled (in the range of 0.020-0.050ng m(-3)) were low enough for the determination of several hydride-forming elements from PM(10) and PM(2.5) samples collected in a non-polluted suburban area of A Coruña (NW Spain).

Direct determination of Ge in hot spring waters and coal fly ash samples by hydride generation-ETAAS.

A method for Ge determination in hot spring water and acid extracts from coal fly ash samples involving hydride generation, trapping and atomisation of the hydride generated from Ir-treated graphite tubes (GTs) has been developed. Hydride was generated from hydrochloric acid medium using sodium tetrahydroborate. Several factors affecting the hydride generation, transport, trapping and atomisation efficiency were studied by using a Plackett-Burman design. Results obtained from Plackett-Burman designs suggest that trapping and atomisation temperatures are the significant factors involved on the procedure. The accuracy was studied using NIST-1633a (coal fly ash) reference material. The detection limit of the proposed method was 2.4mugl(-1) and the characteristic mass of 233pg was achieved. The Ge concentrations in fly ash and hot spring samples were between 6.25-132mugg(-1) and 12.84-36.2mugl(-1).

Bismuth determination in environmental samples by hydride generation-electrothermal atomic absorption spectrometry.

A hydride generation procedure, via flow injection, coupled to electrothermal atomic absorption spectrometry was optimised for Bi determination in sea water and hot-spring water and acid extracts from coal, coal fly ash and slag samples. The effects of several variables such as hydrochloric acid and sodium tetrahydroborate concentrations, hydrochloric acid and sodium tetrahydroborate flow rates, reaction coil length, trapping and atomisation temperatures, trapping time and the Ar flow rate have been investigated by using a 2(9)*3/128 Plackett-Burman design. From these studies, certain variables (sodium tetrahydroborate concentration and trapping time) showed up as significant, and they were optimised by a 2(2)+star central composite design. In addition, a study of the bismuthine trapping and atomisation efficiency from graphite tubes (GTs) permanently treated with uranium, tantalum, lanthanum oxide, niobium, beryllium oxide, chromium oxide and tantalum carbide were investigated. The results obtained were compared with those achieved by iridium and zirconium-treated GTs. The best analytical performances, with characteristic mass of 35 pg and detection limit of 70 ng l(-1), were achieved by using U-treated GTs. Accuracy were checked using several reference materials: 1643d (Trace Elements in Water), TM-24 (Reference Water), GBW-07401 (Soil) and 1632c (Trace Elements in Coal).